7 Series E38 L7 (M73) SAL
51 16 060
Removing and installing/replacing interior
rearview mirror (with full foot)
Important!
Work may only be carried out at a room/object temperature of
18 ... 28
°
C.
If this cannot be guaranteed (cold/hot countries), it is
necessary to equalize the temperature of the windscreen,
mirror foot and rearview mirror (e.g. car left to stand indoors or
in the shade for at least 30 minutes).
Important!
To avoid breaking windscreen:
Snap out (press) rearview mirror only in direction of travel
towards windscreen.
Do not under any circumstances twist the mirror foot when
removing.
Twisting the mirror off the mirror mount will damage the rear
catch.
If the rear catch is damaged, the mirror will be loose when
installed and must be replaced.
Important!
Risk of damage!
Do not pull off rearview mirror (1) from windscreen against
direction of travel and or snap out by turning.
Snap out interior mirror (1) from mirror mount (2) towards front
with increasing pressure (not abruptly) and remove.
Installation:
1.
Twist mirror foot by approx. 45
°
and fit to mirror mount.
2.
Turn mirror foot until it engages on mirror base.
RA Removing and installing/replacing interior rearview mirror (with full foot)
BMW AG - TIS
22.02.2013 05:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -