bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Wooden Finisher And Front Section On Cup Holde > < 3 RA Removing And Installing Monitor Console
Page 2
background image

Release screws (1) on front wooden finisher.

Raise wooden finisher (2) and pull towards rear.

Installation:

First install wooden finisher without center grill.

Slide wooden finisher as far forward as possible and screw
down.

Disconnect plug connections (1) and (2) for center grill light.

Press in locks (1) and feed out center grill towards bottom.

Release screws (1) on wooden finisher, bottom.

Detach monitor console from wooden finisher.

If necessary, remove monitor,

refer to 65 41 ...

RA  Removing and installing monitor console

BMW AG - TIS

22.02.2013  04:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing_replacing Wooden Finisher And Front Section On Cup Holde > < 3 RA Removing And Installing Monitor Console