7 Series E65 730d (M57T2) SAL
65 77 632
Replacing both sensor mats for rear seat
occupancy detector
Necessary preliminary tasks:
•
Remove seat cover for rear seat
Remove control units (1) on left and right.
Remove sensor mats (2).
Important!
To avoid malfunctions, make sure sensor mat (2) is cleanly
laid:
•
Lay plug connections in designated recesses.
•
Lay sensor mats (2) straight and without kinks (large
bending radii).
•
If necessary, secure sensor mats (2) with adhesive tape
provided.
•
Feed sensor mats (2) in areas of transition (e.g. seat
cushion to side section) cleanly into penetrations of padding.
RA Replacing both sensor mats for rear seat occupancy detector
BMW AG - TIS
03.02.2013 04:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
