7 Series E65 730i (M54) SAL
61 71 016
Removing and installing/replacing a jet nozzle
in windshield washer system
Note:
The procedure for removing the left and right spray nozzles is
different.
Removing left spray nozzle:
Remove cover cap (1) in direction of arrow.
Installation:
Make sure locks (1) are correctly engaged.
Unlock plug (2) and detach.
Release distributor (4) and detach from holder (3) towards top.
Important!
At low outside temperatures, carefully heat washer fluid
line (1) in area of distributor (4) with hot air blower.
Otherwise distributor (4) may break off.
Detach washer fluid line (1) by turning.
RA Removing and installing/replacing a jet nozzle in windshield washer system
BMW AG - TIS
05.02.2013 19:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -