7 Series E65 735i (N62) SAL
Note:
Illustration with engine removed.
Remove eccentric shaft sensor (2).
Detach guide rail from cylinder head.
Release screws between cylinder head and timing case cover.
Note:
At narrow points, use a socket with 3/8" drive and a short
extension.
Slacken off cylinder head bolts by one turn in
sequence 10 ... 1.
RA Removing and installing left cylinder head (N62 to 9/03)
BMW AG - TIS
08.02.2013 02:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
