7 Series E65 735i (N62) SAL
Rotate eccentric shaft at dihedral head as shown in illustration
back to minimum stroke position.
Note:
At narrow points, use a socket with 3/8" drive and a short
extension.
Tighten down the cylinder-head bolts in order 1 ... 10.
Tightening torque 11 12 8AZ
.
Insert and tighten down screws between cylinder head and timing
case cover.
Insert and tighten down guide rail screw.
RA Removing and installing left cylinder head (N62 to 9/03)
BMW AG - TIS
08.02.2013 02:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -