7 Series E65 735i (N62) SAL
Rotate eccentric shaft at dihedral head as shown in illustration
back to minimum stroke position.
Note:
Illustration with engine removed.
Install eccentric shaft sensor (2).
Tighten down chain tensioning piston (1).
Tightening torque 11 31 8AZ
.
Install inlet and exhaust adjustment units on right side.
Assemble engine.
RA Removing and installing right cylinder head (N62 to 9/03)
BMW AG - TIS
08.02.2013 02:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
