7 Series E65 735i (N62) SAL
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
Caution!
When removing and installing pistons, make sure piston
cooling spray nozzles (1) are not damaged.
Remove connecting-rod cover.
Note:
Conrods and conrod bearing caps are denoted with the same
pairing letters.
Set down conrod bearing caps in order.
Insert special tools 11 8 151 and 11 8 152 in conrod.
Remove connecting rod with piston from cylinder-head side.
RA Removing and installing/replacing all pistons (N62)
BMW AG - TIS
08.02.2013 02:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
