Removing and Installing Rocker Arms on Left Inlet Side for 7 Series E65 735i
Rotate inlet camshaft against direction of rotation until
lettering (1) on 8th cylinder points upwards in cylinder axis and
cam is horizontal.
Important!
Camshaft bearing caps of cylinders 1 to 4 and 5 to 8 must
not be mixed up.
Note:
Bearing caps of inlet camshaft are marked on cylinder bank 5
to 8 with R E1 to R E5 from inlet side.
Release nuts and remove bearing cap R E1.
Release 8 nuts of bearing bracket (1) from outside to inside.
Clamp special tool 11 9 470 as illustrated in a vice.
RA Removing and installing/replacing rocker arms on left inlet side (N62 from 9/03
BMW AG - TIS
08.02.2013 03:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -