7 Series E65 735i (N62) SAL
Rotate inlet camshaft at hexagon head against direction of rotation
until cam on 1st cylinder points downwards at an angle as shown
in illustration.
Note:
The marking (1) on the hexagon drive of the inlet camshaft faces
upwards.
Install inlet and exhaust adjustment unit on right side.
Install spark plugs on cylinder bank 1 to 4.
Install right cylinder head cover.
Install ignition coils on cylinder bank 1 to 4.
Install servomotor for right eccentric shaft.
Assemble engine.
RA Removing and installing/replacing right intermediate levers (N62 from 9/03 and N
BMW AG - TIS
08.02.2013 03:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
