7 Series E65 735i (N62) SAL
11 31 038
Removing and installing/replacing right
exhaust camshaft (N62/N62TU)
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Remove servomotor for right eccentric shaft
•
Remove ignition coils on cylinder bank 1 to 4
•
Remove right cylinder head cover
•
Remove spark plugs on cylinder bank 1 to 4
•
Remove right inlet and exhaust adjustment units
Remove slide rail (1).
Rotate exhaust camshaft at hexagon head against direction of
rotation until exhaust cam on cylinder (2) faces upwards.
Important!
Camshaft bearing caps of cylinders 1 to 4 and 5 to 8 must
not be mixed up.
Note:
Bearing caps of exhaust camshaft are marked on cylinder bank 1
to 4 with L A1 to L A5 from inlet side.
Release nuts and remove bearing cap L A1.
RA Removing and installing/replacing right exhaust camshaft (N62/N62TU)
BMW AG - TIS
08.02.2013 03:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
