7 Series E65 735i (N62) SAL
Note:
For use on the N62 engine, special tool 11 6 380 must be
remachined in accordance with the illustration with a 6.2 mm
dia. drill bit to a depth of A = approx. 45 mm.
This modification has already been taken into account for
reordering.
Press on valve stem seal with special tool 11 6 380 by hand as
far as it will go.
RA Replacing all valve stem seals (N62)
BMW AG - TIS
08.02.2013 03:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -