7 Series E65 735i (N62) SAL
Important!
Needle bearings (1) break off very easily when removed and
installed.
Carefully press needle bearings (1) apart at split position only to
such an extent that they can be removed from eccentric shaft.
Note:
If the needle-roller bearings are replaced, the bearing shells must
be replaced as well.
Carefully press bearing shell (1) to one side and simultaneously
remove towards top.
Installation:
Installation of eccentric shaft is described separately from
removal.
Note:
Lubricate eccentric shaft at bearing positions.
Replace needle bearing (1).
Important!
Needle bearings break off very easily when installed.
Carefully press needle bearings (1) apart at split position only to
such an extent that they can be fitted over eccentric shaft.
RA Removing and installing/replacing right eccentric shaft (N62 from 9/03 and N62TU
BMW AG - TIS
08.02.2013 03:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
