7 Series E65 735i (N62) SAL
11 37 012
Removing and installing/replacing left
intermediate levers (N62 from 9/03 and
N62TU)
Special tools required:
•
11 9 470
•
11 9 472
•
11 9 473
•
11 9 474
•
11 9 475
•
11 9 480
•
11 9 490
(cylinder bank 5 to 8)
Removal of intermediate levers is described separately from
installation.
Necessary preliminary tasks:
•
Remove servomotor for left eccentric shaft
•
Remove ignition coils on cylinder bank 5 to 8
•
Remove left cylinder head cover
•
Remove spark plugs on cylinder bank 5 to 8
•
Remove left inlet and exhaust adjustment units
Important!
The inlet camshaft must first be rotated so that when the
bearing bracket is removed the intermediate levers do not slip
out and damage the camshaft.
RA Removing and installing/replacing left intermediate levers (N62 from 9/03 and N6
BMW AG - TIS
08.02.2013 03:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
