7 Series E65 735i (N62) SAL
11 41 000
Removing and installing/replacing oil pump
(N62)
Necessary preliminary tasks:
•
Drain engine oil.
•
Remove upper oil sump section.
•
Remove reinforcement plate.
Unscrew nut (1).
Tightening torque 11 41 4AZ
.
Remove oil pump sprocket wheel (2).
Release screws, remove oil pump (1) with aid of a second
person.
Installation:
Replace screws.
Tightening torque 11 41 2AZ
.
Installation:
Replace sealing ring (1).
Apply light coat of oil to sealing ring (1).
RA Removing and installing/replacing oil pump (N62)
BMW AG - TIS
08.02.2013 03:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -