7 Series E65 735i (N62) SAL
11 78 ...
Removing and installing/replacing exhaust
temperature sensor (BMW ALPINA B7)
Necessary preliminary tasks:
•
Remove reinforcement plate
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Unlock and disconnect plug connection (1) at transmission.
Unclip cable from cable guides.
Release union nut (1) and remove exhaust temperature sensor.
Installation:
Tightening torque: 25 Nm.
Important!
Do not use any force to release the exhaust temperature
sensor as this could damage the sensor!
RA Removing and installing/replacing exhaust temperature sensor (BMW ALPINA B7)
BMW AG - TIS
08.02.2013 03:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
