7 Series E65 735i (N62) SAL
12 42 540
Replacing safety battery terminal (SBK)
Caution!
Comply with safety regulations!
Investigate cause of safety battery terminal being triggered.
To do so, read fault memory of airbag control unit. Note down
fault messages stored in memory. Rectify faults. Now clear
the fault memory.
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel.
•
Remove spare wheel cover.
•
Remove spare wheel.
•
Remove right luggage compartment wheel arch trim.
•
Remove jack.
•
Remove right luggage compartment mat underlay.
•
Follow instructions for disconnecting and connecting battery.
•
Disconnect battery negative lead and cover.
•
Unlock battery positive terminal cover in luggage
compartment and lift out.
Note:
The safety battery terminal is replaced with the cable up to the
battery positive terminal in the luggage compartment and up to the
power module.
RA Replacing safety battery terminal (SBK)
BMW AG - TIS
08.02.2013 04:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
