7 Series E65 735i (N62) SAL
Insert special tool 16 1 080 into filler neck.
Special tool 16 1 080 has two different diameters for
petrol/gasoline and diesel vehicles!
Slide extraction hose of extractor unit, refer to BMW Service
Workshop Equipment and Planning Documentation, through
special tool 16 1 080 into the fuel filler pipe, turning in the
process if necessary.
Insertion length:
130 cm
All except E53 and E65 / E66
150 cm
E53 and E65 / E66
Draw off fuel with extractor unit,
refer to BMW Service Workshop Equipment & Planning
documentation,
as far as possible.
Follow the fuel drawing-off procedure at the fuel gauge in the
instrument cluster.
Drawing off residual fuel quantity:
Drawing off residual fuel amount is not included in the time value
of this operation.
Important!
Ensure car interior is adequately ventilated.
Catch dripping fuel in a suitable container.
Remove fuel gauge sensor (right).
Remove fuel gauge sensor (left).
Draw off residual fuel quantity through installation openings.
Fuel filling:
Insert special tool 16 1 080 into filler neck.
Special tool 16 1 080 has two different diameters for
petrol/gasoline and diesel vehicles!
Slide extraction hose of extractor unit, refer to BMW Service
Workshop Equipment and Planning Documentation,
approx. 40 cm into fuel filler pipe.
Fill fuel from suction extractor unit.
RA Draining and filling fuel tank
BMW AG - TIS
08.02.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
