7 Series E65 735i (N62) SAL
Important!
Do not damage gasket.
Release screws (1) and fold back metal cover.
Important!
Fuel hoses are pressurized.
Unfasten plug connection (1) and disconnect.
Unfasten hoses and detach carefully.
Do not damage connecting piece when doing so.
Release screw cap with special tool 16 1 020 and remove.
Installation:
Replace seal.
Tightening torque 16 14 2AZ
.
RA Removing and installing / replacing fuel gauge sensor (left)
BMW AG - TIS
08.02.2013 04:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
