7 Series E65 735i (N62) SAL
Important!
Risk of breakage!
Carefully raise service cap. In so doing, do not pull
excessively on connecting piece of fuel feed.
Installation:
Service cap can only be installed in one position.
When installing, make sure lug (1) of service cap engages in
corresponding opening (2) on fuel tank.
During torque tightening, notch (3) on screw cap can be clearly
heard and felt to engage toothed segment (4) on fuel tank.
Replace seal.
Disconnect plug connection (2).
Carefully remove cap with spiral hose and fuel pump from fuel
tank.
RA Removing and installing / replacing fuel pump
BMW AG - TIS
08.02.2013 04:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
