7 Series E65 735i (N62) SAL
16 14 530
Replacing sucking jet pump
Draw off fuel from fuel tank.
Remove sensor for fuel gauge (left).
Remove sensor for fuel gauge (right).
Right side
Release catch for suction jet pump on surge chamber. Detach line
upwards.
Installation:
Ensure that line locates correctly in surge chamber.
Left side
Remove sucking jet pump from fuel tank and pull upwards to
remove
Installation:
Carefully insert line in sucking jet pump, do not bend.
It is absolutely essential to ensure that the line harness for the
suction jet pump is correctly positioned in the fuel tank!
RA Replacing sucking jet pump
BMW AG - TIS
08.02.2013 04:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -