7 Series E65 735i (N62) SAL
17 11 035
Removing and installing/replacing fan cowl
with electric fan (N62 / N62TU, M57TU,
M67TU)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
N62TU only: Remove fresh air duct
•
Removing radiator cover
•
If necessary, unclip vent line from bracket
Unlock and disconnect plugs (1) (AUC sensor is not necessarily
fitted).
Raise fan cowl (2) approx. 3 cm.
Note:
Illustration shows N52.
Note:
For purposes of clarity, this work step is shown on the fan cowl
after it has been removed.
Fold in left retaining tab (1) in direction of arrow.
Remove fan cowl towards top.
RA Removing and installing/replacing fan cowl with electric fan (N62 / N62TU, M57TU
BMW AG - TIS
08.02.2013 05:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
