7 Series E65 735i (N62) SAL
17 22 010
Removing and installing/replacing heat
exchanger for automatic transmission (N62)
Special tools required:
•
17 0 030
Follow instructions for working on cooling system.
Drain coolant from radiator.
Installation:
Top up coolant and vent cooling system.
Recycling
Catch and dispose of drained coolant.
Transmission fluid emerges when oil lines are detached from heat
exchanger.
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
Unlock water hoses (1) on heat exchanger (3) and disconnect.
RA Removing and installing/replacing heat exchanger for automatic transmission (N62
BMW AG - TIS
08.02.2013 05:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
