bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Emergency Actuator|Page 1145 > < 1 RA Removing And Installing_replacing Torque Converter (GA6HP26Z_6HP32Z)|Page 1142
Page 1
background image

24 50 010

Replacing emergency actuator

Remove automatic transmission.

Remove trim panel for pedal assembly.

Release screws.

Place light module (1) to one side.

Remove accelerator pedal module.

Remove pedal bracket.

Remove left front seat.

Remove front left entrance strip.

Remove panel from A-pillar at bottom left.

Remove panel from center console at bottom left.

Remove speaker frame in footwell carpet at front left.

Pull back footwell carpet on left under instrument panel.

Release screws (1) of emergency actuator (2).

RA  Replacing emergency actuator

BMW AG - TIS

08.02.2013  05:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Emergency Actuator|Page 1145 > < 1 RA Removing And Installing_replacing Torque Converter (GA6HP26Z_6HP32Z)|Page 1142