7 Series E65 735i (N62) SAL
Unclip steering column insert (1).
Disconnect plug connections (2).
Remove wiring harness from steering column.
Release screws (1).
Tightening torque 32 31 6AZ
.
Release screws (1).
Remove steering column towards rear.
Installation:
Centre steering column in instrument panel cutout.
Tightening torque 32 31 6AZ
.
After installation:
•
Carry out steering angle sensor adjustment
•
Perform function check:
I)
Check for ease of movement in overall adjustment range
of steering column to adjoining components/wires
II)
Turn steering wheel in both directions to full lock. The
airbag warning lamp must not light up in the process.
•
Check directional stability of car
RA Removing and installing steering column
BMW AG - TIS
08.02.2013 06:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
