7 Series E65 735i (N62) SAL
32 33 ...
Replacing decorative strips for steering wheel
(BMW ALPINA B7)
Special tools required:
•
61 3 120
Necessary preliminary tasks:
•
Remove airbag unit
Release screws (1).
Important!
Risk of breakage!
Carefully remove multifunction steering wheel switches with
decorative strips and retaining plate (2) from steering wheel.
Disconnect plug connections on rear side.
Installation:
Make sure connecting cables are correctly routed.
Make sure that decorative strips and multifunction steering
wheel switches are correctly positioned on steering wheel (guide
pins must not be damaged).
Tightening torque 32 33 2AZ
.
RA Replacing decorative strips for steering wheel (BMW ALPINA B7)
BMW AG - TIS
08.02.2013 06:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -