7 Series E65 735i (N62) SAL
Variant (A) - build date up to 05/2004:
Release screws (1, 2).
Tightening torque 32 41 1AZ
.
Remove vane pump.
Variant (B) - build date from 05/2004:
Release bolt (1) and nut (2).
Remove vane pump.
Installation:
Replace self-locking nut.
Tightening torque 32 41 1AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing vane pump (N62, N62TU) for power steering (from 10/2003)
BMW AG - TIS
08.02.2013 07:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
