7 Series E65 735i (N62) SAL
Tightening torque 33 32 20AZ
.
Unfasten nut.
Remove screw towards rear.
Installation:
Replace self-locking nut.
Tighten bolt connection in normal position.
Tightening torque 33 32 20AZ
.
Unfasten nut.
Remove screw towards rear and remove swinging arm.
Installation:
Replace self-locking nut.
Tightening torque 33 32 22AZ
.
After installation:
•
Check that output shaft is correctly seated in rear differential.
•
Perform chassis alignment check
RA Removing and installing/replacing left or right swinging arm
BMW AG - TIS
08.02.2013 07:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -