7 Series E65 735i (N62) SAL
36 10 ...
General information on wheel and tyre (BMW
ALPINA B7)
Note:
•
Make sure that the wheels and tyres used are approved
BMW ALPINA combinations (see below).
•
The valve for checking the tyre inflation pressure is located
under the hub cover.
Removing hub cover:
Press on emblem in area (1) and turn in direction of arrow.
Open lock with key (1) and remove hub cover (2).
Installation:
Make sure that the friction film pieces (1) are in place on the hub
cover.
When replacing the hub cover, remember to stick on the friction
film pieces that are also supplied.
RA General information on wheel and tyre (BMW ALPINA B7)
BMW AG - TIS
08.02.2013 08:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -