7 Series E65 735i (N62) SAL
37 14 511
Replacing front ride-height sensor
Important!
Observe safety instructions for raising the vehicle.
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection)!
Necessary preliminary tasks:
•
Remove underbody protection
•
If necessary, remove right steering gear cover
Disconnect plug connection (1).
Release nut (2) and disconnect jointed rod.
Tightening torque 37 14 7AZ
.
Release screws (3) and remove ride-height sensor from bracket.
Installation:
Sensor lever must point from ride-height sensor to right front
wheel.
Tightening torque 37 14 6AZ
.
RA Replacing front ride-height sensor
BMW AG - TIS
08.02.2013 09:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
