7 Series E65 735i (N62) SAL
Fit special tool 41 1 072 (2) at bottom to spring strut support
plate.
Position special tool 41 1 071 (1) at top on spring strut support
plate and secure.
Insert punch numbers 41 0 000 (1) individually into guide
plate (2) and stamp vehicle identification number.
Note:
In the event of component or body replacement by the
workshops/garages, clearly delimit the vehicle identification
number at front and rear by stamping a "+" in place of the BMW
emblem.
Note national regulations.
RA Stamping vehicle identification number
BMW AG - TIS
08.02.2013 09:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
