7 Series E65 735i (N62) SAL
41 11 028
Replacing left engine carrier (partial
replacement before front axle)
Read contents of Body, General.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
Partial section, engine carrier
Mark severance cut (1) in accordance with measurement a and
cut engine carrier completely.
Measurement a = approx. 35 mm from edge of diagonal strut.
Open weld joints in area (2) on inside and outside of engine
carrier.
Open weld joint in area (1) and remove sheet.
Installation information:
The joint is no longer developed for reasons of accessibility.
Weld in reinforcing plate approx. 40 mm long.
RA Replacing left engine carrier (partial replacement before front axle)
BMW AG - TIS
08.02.2013 09:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
