7 Series E65 735i (N62) SAL
51 11 ...
Fitting front spoiler (BMW ALPINA B7)
Note:
Bumper trim (1) can already by supplied cut to size.
Cut uncut bumper trim (1) to dimensions (A to G).
A = 85 mm
B = 600 mm
C= 45 mm
D= 250 mm
E = 145 mm
F = 60 mm
G = 50 mm
Place front spoiler on cut bumper trim and check for accuracy of
fit; if necessary, rework bumper trim.
Remove cover from towing eye.
Grind off ridges (1) flat with bumper trim (2).
Clean adhesive area of bumper trim with spirit.
Lay out clamp or screw clamp ready.
RA Fitting front spoiler (BMW ALPINA B7)
BMW AG - TIS
08.02.2013 10:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
