7 Series E65 735i (N62) SAL
51 16 ...
Removing and installing storage trays
(drawers) on function carrier
Removing top storage tray (drawer) from function carrier:
Version with cordless keypad handset (telephone):
If necessary, remove eject box (cordless keypad handset).
Version without telephone:
Unlock and open storage tray (drawer).
Important!
Cover decorative strip with a protective cover (1) to prevent
scratching.
Detach drawer (4) from function carrier as follows:
-
With a 1 mm feeler gauge (2)
-
Release lock (3) by turning
-
Pull storage tray towards rear out of function carrier and set
down on protective cover (1)
Note:
A hand mirror (4) will be required for viewing.
Installation:
Springs (1) must be correctly connected in mountings (2).
Catch (3) must not be damaged.
RA Removing and installing storage trays (drawers) on function carrier
BMW AG - TIS
08.02.2013 10:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -