7 Series E65 735i (N62) SAL
51 16 197
Removing and installing / replacing
decorative trim on centre armrest
Necessary preliminary tasks:
•
Remove centre armrest (front).
•
Remove control unit in centre armrest (front)
•
Remove switch combination for seat adjustment on left and
right
Version with rear compartment monitor:
•
Remove rear compartment monitor
Important!
Tape off decorative trim with suitable adhesive tape (1).
Unlock plug (2) and feed out towards bottom.
Release screws (3).
Press trim (4) in direction of arrow (A) and press out in direction
of arrow (B) from inside outwards.
Installation:
Make sure guides (1) are not damaged; if necessary, replace
trim (2).
Release screws (1) on left/right.
Remove centre armrest panel (2) on left/right in direction of
arrow.
RA Removing and installing / replacing decorative trim on centre armrest
BMW AG - TIS
08.02.2013 11:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -