7 Series E65 735i (N62) SAL
51 24 ...
Removing and installing/replacing angle
transmitter for rear lid actuation
(electrohydraulic-fully automatic)
Necessary preliminary tasks:
•
Remove right luggage compartment wheel arch trim
•
Remove panel for rear window shelf
Lever out cable holder (1).
Lever out cover (2) and remove.
3
Luggage compartment lid
Release screw (1).
Note:
Before nuts (3) are released, a 2nd person must open rear lid
and hold angle transmitter (2).
Unscrew nuts (3).
Tightening torque 51 24 7AZ
.
RA Removing and installing/replacing angle transmitter for rear lid actuation (elec
BMW AG - TIS
08.02.2013 11:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
