7 Series E65 735i (N62) SAL
51 24 050
Removing and installing/replacing lock
element (lock cylinder) for rear lid (from
03/2005)
Necessary preliminary tasks:
•
Remove panel for rear lid
Detach Bowden cables (1 and 2) from rear lid lock.
Lever out expanding wedge (3) and detach guide (4).
Feed Bowden cable (2) out of Bowden cable (1) and guide (4).
Unscrew nuts (1).
Remove lock element (2) inwards and feed out with Bowden
cable (3).
RA Removing and installing/replacing lock element (lock cylinder) for rear lid (fro
BMW AG - TIS
08.02.2013 11:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -