7 Series E65 735i (N62) SAL
Detach prestamped positioning aid from backing.
-
Positioning aid "C5" rear door, left
-
Positioning aid "D5" rear door, right
Align positioning aid with printed help markings (X, Y), line (4) of positioning aid (C4) and contact edge (2) to rear
door and press.
Seal must rest on positioning edge (1) during sticking.
X
Start of bend radius
Y
Bore for door brake
Z
Opening due to folding
Caution!
-
Do not grip bonding surface.
-
It is not the length of pressing in time but rather the level
of pressing (approx. 10 ... 15 N/cm
2
) which is
decisive here.
-
Separation of seal after pressing destroys the adhesive
layer.
Note:
After being pressed on gently, seal can be pulled off again up to 3
times. Do not dirty adhesive area.
RA Removing and installing/replacing seal on rear door, left or right
BMW AG - TIS
08.02.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -