7 Series E65 735i (N62) SAL
52 14 380
Removing and installing/replacing head
restraint mount on left or right front seat
Necessary preliminary tasks:
•
Remove front seat.
•
Remove rear panel on front seat backrest.
Press catches (1).
Slide component (2) in direction of arrow and remove.
Unhook backrest cover at top.
Unhook cables (1) from component (2).
Detach retaining points (1) on backrest frame.
Feed out cables.
Note:
Upper cable must be removed from idler pulley.
Installation:
Make sure cables are correctly laid.
RA Removing and installing/replacing head restraint mount on left or right front se
BMW AG - TIS
08.02.2013 13:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -