7 Series E65 735i (N62) SAL
52 17 400
Removing and installing/replacing seat cover
for left or right front seat (comfort)
Special tools required:
•
52 0 050
Necessary preliminary tasks:
•
Remove front seat.
•
Remove both rear panels on front seat backrest.
•
Remove inner cover on front seat.
•
Remove thigh support.
Warning!
US/CDN front passenger seat (with OC3 mat) only:
To avoid damaging the OC3 mat, it is essential to carry out
the following operations with extra care.
When replacing seat cover:
If seat cover is defective, seat cover and support with OC3 mat
must be replaced together.
New seat cover is supplied with support, OC3 mat and if
necessary seat heating.
When replacing support with OC3 mat:
If OC3 mat or support is defective, both parts may only be
replaced together.
These must be fitted with the seat cover from the car.
RA Removing and installing/replacing seat cover for left or right front seat (comfo
BMW AG - TIS
08.02.2013 13:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -