7 Series E65 735i (N62) SAL
52 25 059
Removing and installing/replacing valve
housing for lumbar cushion
Necessary preliminary tasks:
•
Remove rear seat.
Release screw (1).
Installation:
Install valve housing (2):
•
Left seat - outer retaining point
•
Right seat - inner retaining point
Disconnect plug connection (3).
Disconnect air hoses (4) and (5) from valve housing.
Note:
Heat air hoses gently if they are firmly seated on valve housing.
RA Removing and installing/replacing valve housing for lumbar cushion
BMW AG - TIS
08.02.2013 14:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -