7 Series E65 735i (N62) SAL
52 25 380
Removing and installing/replacing left or right
rear head restraint mount
Necessary preliminary tasks:
•
Remove rear head restraint.
•
Remove trim for armrest at rear.
•
Remove rear panel on rear seat backrest.
•
If necessary, remove backrest cover for rear seat.
Note:
Move head restraint fully downwards (otherwise removal of head restraint guide is not possible!).
Disconnect plug connection.
Unlock catches (1) and remove guide (2) on left and right towards top.
Release screws (3).
Tilt head restraint mount (4) in direction of arrow and feed out towards top.
RA Removing and installing/replacing left or right rear head restraint mount
BMW AG - TIS
08.02.2013 14:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
