7 Series E65 735i (N62) SAL
Release screws (1).
Pull out fixture for steering column stalk (2) in direction of arrow.
Disconnect plug connections behind and remove fixture for
steering column stalk (2).
Replacement:
Note:
Illustration shows fixture for steering column stalk installed.
Release screws (1).
Remove steering column control (2).
Replacement:
Carry out programming/coding.
Carry out steering angle sensor adjustment.
RA Removing and installing (replacing) fixture for steering column stalk
BMW AG - TIS
08.02.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
