7 Series E65 735i (N62) SAL
61 31 232
Removing and installing/replacing steering
wheel module control unit (sports steering
wheel)
Necessary preliminary tasks:
•
Remove airbag unit.
Note:
Illustration shows sports steering wheel removed.
Release screws (1).
Raise steering wheel retaining plate (2) slightly and disconnect
plug connections (3).
Remove steering wheel retaining plate (2) from sports steering
wheel (4).
Disconnect plug connections (1).
Installation:
Make sure plug connections (1) and leads are correctly seated in
mountings (2).
Pull steering wheel module control unit (3) in direction of arrow
out of sports steering wheel (4).
Installation:
Make sure steering wheel module control unit (3) is exactly
seated in sports steering wheel (4).
RA Removing and installing/replacing steering wheel module control unit (sports ste
BMW AG - TIS
08.02.2013 15:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
