7 Series E65 735i (N62) SAL
61 31 310
Replacing brake light switch
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
Disconnect plug connection (1).
Pull brake light switch (2) in direction of arrow out of brake light
switch holder (4).
Installation:
•
Press brake pedal (3) to floor.
•
Push brake light switch (2) as far as it will go into brake light
switch holder (4).
•
Grip brake light switch holder (4), slowly return brake
pedal (3) to starting position and pull back to stop.
Note:
Removing brake light switch holder (1):
Press brake pedal.
Unclip brake light switch holder (1) at limbs (2) and remove
towards rear.
RA Replacing brake light switch
BMW AG - TIS
08.02.2013 15:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
