7 Series E65 735i (N62) SAL
65 12 072
Removing and installing (replacing) amplifier
(Top hi-fi system)
Necessary preliminary tasks:
•
Disconnect battery negative lead.
•
Remove luggage compartment wheel arch trim on left.
Note:
Follow instructions for handling optical fibers.
Pull out retaining plates (1) in direction of arrow.
Installation:
Make retaining plates (1) are correctly seated.
Remove amplifier (2) from holder (3).
Unlock plug connections (4) and disconnect.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) amplifier (Top hi-fi system)
BMW AG - TIS
08.02.2013 19:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
