7 Series E65 735i (N62) SAL
65 77 558
Removing and installing/replacing control
electronics for driver's seat occupancy
detector
Necessary preliminary tasks:
Move seat into "back" and "top" position.
If necessary, cut through cable strap on control electronics (1).
Turn control electronics (1) approx. 45
°
in direction of arrow and
unclip from seat frame.
Disconnect plug connections (2) and remove control
electronics (1).
RA Removing and installing/replacing control electronics for driver's seat occupanc
BMW AG - TIS
08.02.2013 19:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -