7 Series E65 735i (N62) SAL
Installation:
Do not kink ribbon cables (3) when assembling control
display (2) and MOST CAN gateway control unit (1).
Unlock plug connections (1) and disconnect.
Remove MOST CAN gateway control unit (2) from control
display (3).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Replacing MOST CAN gateway control unit
BMW AG - TIS
08.02.2013 19:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -