7 Series E65 735i (N62) SAL
Replacement:
Unhook emergency actuation pull strap (1) from clip (2) and
remove from locking pin (3) of servodrive for fuel filler flap (4).
Turn sleeve (1) with a suitable tool (e.g. pointed pliers) approx.
45
°
in direction of arrow and pull out of receptacle (2).
Installation:
Make sure sleeve (1) is correctly seated on locking pin for tank
filler flap (2).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
08.02.2013 20:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
