7 Series E65 735i (N62) SAL
72 12 010
Removing and installing/replacing airbag
module on left or right front door
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead
Follow instructions for disconnecting and connecting battery!
•
Remove front door trim
Release nuts (1) and remove holder (2).
Installation:
Tightening torque: 72 12 01AZ
.
Coat nut and thread with paint (any color and type can be
chosen).
Fold back tabs (1) of plastic housing and remove airbag
module (2) from airbag mounting.
RA Removing and installing/replacing airbag module on left or right front door
BMW AG - TIS
08.02.2013 20:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
